Showing posts with label Chevrolet. Show all posts
Showing posts with label Chevrolet. Show all posts

Saturday, 10 October 2026

The Seven Golden Jacks

 


March 1968 brought a funny little car to our local Corgi stockist. It was a Mini-Marcos GT850 and something of a strange choice, the Marcos brand being a rare sight on our roads and this one being a particularly ugly car in reality. Corgi did, however, manage to make it look quite pretty in 1:43 scale.


Having said that, we did not see that many Buick Rivieras or Ghia 6.4 litres on the roads in Hertfordshire either. I believe one of the top guys at Corgi had a personal friendship with Messrs Marsh and Costin who ran Marcos which may explain why several of their range made it to the Corgi catalogues. Whatever the case, the Mini-Marcos, as model #341, was Corgi's first with a new feature they called Golden Jacks. These were levers which could be moved to provide a stand for an axle and also permit a wheel to be removed.

The levers were initially made in a golden colour metal but later models can be found with gold , silver or plain metal.

The Mini-Marcos had a host of other features too, an opening bonnet, doors and sliding seats. In a later guise,in blue with Whizzwheels this little car will become one of the scarcest Corgi issues, appearing just briefly in a Car Transporter Gift Set in 1972.

The #341 model was produced only in a lovely shade of metallic maroon with a white interior. This is the only Golden Jacks model to have small size wheels.



As can be seen from the 1969 Corgi Catalogue, this was the first of a series proposed by Corgi, with #275 Rover 2000TC following in April 1968.


This was very popular, being a very attractive and accurate casting. It essentially used the #252 casting, adding some welcome chrome to the front and rear, jewels in the holes where Trans-o-lite tubes had fitted before, a spare wheel in a carrier on the boot and a slightly unusual tinted perspex roof.

I had the single carburettor version as a real car myself but don't recall any options of such a roof. Unless it had particularly good heat absorbency or diminishing features, life would have been uncomfortable inside on hot sunny days!

The wheels I do recall reflecting very accurately the design of the large hubs fitted to these cars at that time. The 'TC' logos on the side and rear were a bit large, though! Nevertheless, this was a fine model.


The majority of these Rover 2000TC models issued were finished in metallic green with a beige interior. There are, however, variations with a red interior and a white interior. These are not common but not too difficult to find. Then there is also a white edition with a red interior. Again, considerably fewer white models were produced but they're easy enough to find.





Like the Mini-Marcos, the Rover would get Whizzwheels a couple of years later and a few revisions, to be released as #281 in August 1971 and just 48,000 sales establishing that version quite high in the 'rarest Corgi' list.

A couple of months later, in May 1968, the Oldsmobile Toronado gets the Golden Jacks treatment too. This time there is just a fresh coat of either metallic bronze-red or amber and a new base. At the same time Corgi took the opportunity to improve the device for operating the flip-up headlamps.





The amber version is a bit less common than the red but both sold well and red editions are inexpensive to buy now.

August 1968 sees the arrival of the fourth Golden Jacks issue in the shape of a new model to the range, #338 Chevrolet Camaro SS350.


This model shared wheels with the Oldsmobile. These are, though, the only two models issued with the same wheels. Having said that, you will now find all sorts of combinations as the normal size wheels are so simple to swap around.



The Chevrolet was always in metallic gold with a black detachable hood, red interior and black bonnet stripe. It also had sliding headlamp covers behind which were jewelled lights. The later Whizzwheels model has merely chrome lamps, not jewels.

As well as sharing wheels with the Oldsmobile, it shares much of its casting and all the interior with the #343 Pontiac Firebird, about which more later.

This model sold fairly well but is re-issued, almost as an afterthought, for a very brief period in 1972 with Whizzwheels and finished in plain blue with a white hood. At the same time the Mini-Marcos reappears too in a box with Whizzwheels, finished in white with racing decals and a red interior. Both of these later issues are now scarce, the Camaro particularly so.

It is almost a year before we see any more Golden Jacks models and, as Whizzwheels appear in September, it is safe to assume that the next issues may only have made it to the shops because lots had already been produced and needed to be sold. The first of what I call the 'reluctant Golden Jacks issues' is in July 1969 when #302 Hillan Hunter emerges in all its glory as a London to Sydney Rally marathon successful finisher, complete with roo bar, jewels front and back, opening tool box on the roof and, of course, Corgi supply a kangaroo in the box as well.


This must have been an expensive model to produce with its totally new casting and a whole lot of bits and pieces not used elsewhere before. I tend to find this model sits rather low, as if the suspension has failed (not that that was very good anyway). That does seem to be how it was produced, however.

As if all the features added were not already enough to get people buying this one, Corgi provided a large sheet of stickers as well as an illustration showing where they were placed on the real car. Personally, I prefer the model with just the RN75 decals but many you will find have the rest scattered across the place with varying degrees of inaccuracy.

In September 1969 there should have been another Golden Jacks issue in the shape of a Ferrari Dino Sport but the order had come from above that Whizzwheels were the future, not Golden Jacks and a model such as the speedy Ferrari should be able to complete on the drawing room floor with other racing cars and not be defeated, as a Golden Jacks car would be, by even a 1956 issue Vanwall and probably even a Bedford CA Van, (although admittedly not the ones with a friction motor).


The Ferrari did appear in September 1969 but with Whizzwheels. Evidence of Corgi's earlier intentions are clear on the boxes for early issues, with stickers covering the text about removable wheels, Golden Jacks etc.and announcing Whizzwheels instead. The base also shows how there might once have been space for levers. There were also promotions in the Catalogue itself.

By March 1970, therefore, Whizzwheels were the order of the day and January 1970 brought us #343, the Pontiac Firebird, again with early boxes hurriedly edited.


February 1970 sees the Lamborghini also appear with Whizzwheels and edited boxes.

Then, in March 1970, we get something of a surprise. 


Rolls Royce was Britain's premier brand. People talked of a Rolls Royce being 'the best car in the world' and there was little dissent from GM or even Cadillac, mere grumbles from Mercedes-Benz and the French refused to comment. I had always wondered why Corgi didn't make a modern Rolls Royce. I had had to buy a Dinky Toy. Heavens! (OK, yes, Corgi did make a Rolls Royce in May 1966 - the 1912 Silver Ghosr but, quite frankly, no-one wanted to have that plastic-bodied affair trundling conspicuously oddly on their layout, a view borne out today by even models in original packaging failing to sell for £10.)

So to see a lovely modern Rolls Royce Silver Shadow issued was a delight.


Mercifully, someone on the Corgi Board had realised that the dreadful plastic Whizzwheels were most definitely not to be attached to this model when first introduced to the public. This was an iconic moment and the model had the potential to become Corgi's most internationally recognisable car image so what had been planned as a Golden Jacks release stayed that way.

Personally, I would have just fitted nice wheels and not bothered with the 'take-off' mechanism. I mean, has anyone ever seen a Rolls Royce changing a wheel at the roadside? A Rolls Royce appearing in any way to be deficient is not correct. For all that, the wheels, a larger size than normal, were excellent and a spare could be found in the boot.

It was a heavy model and it just had to have plenty of chrome at the front and back as well as double jewelled headlamps. The bonnet opened (although I am not sure it does so in the right way) as well as the boot and doors, with tilting seats and a detailed dashboard. The suspension was never great on this model and some, like the Hillman Hunter, do seem a bit too low slung. Production quality, however, did not match the brand, with the model never quite feeling as something you would prize as much as it ought.

The normal issue was finished in a metallic pale cream over a plain greyish-blue. There was also, however, a much more attractive edition in metallic silver over a rich metallic blue which suited the model far better. The model, available only for a short period in 1970, is fairly scarce but in that later finish it is very rare. As it happens, that finish was used in the first Whizzwheels edition which was issued in October, just seven months later.



I suppose the directors in charge of costs and profits at Corgi held precedence over those seeking to maintain quality and appearances and so in October 1970 not only did we see awful Whizzwheels fitted to this model but also in December a Bentley version with the same ghastly wheels and, to add insult to the brand, finished in pink!! 

Remarkably, the Rolls Royce was not the last to be issued with Golden Jacks. There was to be one more - an absolutely beautiful model in the delightful shape of #300 Chevrolet Corvette Stingray.


What made everyone take a second and third look at this model was its finish - an extraordinary, mirror-like finish in metallic deep crimson or emerald green.


The bonnet was matt black and opened and the headlamps popped up to reveal double jewels à la Oldsmobile Toronado. There were two plastic targa roof panels which could be removed too. (Most models now have one or both of these missing or looking rather worn but I have yet to find anyone who makes replacements.)


The Chevrolet has a unique wheel with many radial 'spokes'. It also has lovely red jewels at the back.



Although availability to dealers ceased later in 1970, the Chevrolet was popular and sold a lot more than the Golden Jacks Rolls Royce and almost as many as the Whizzwheels Pontiac and Ferrari. If you held both the Chevrolet Corvette and the Rolls Royce, there was a noticeable difference in production and finish quality.

It would re-appear, like all the other models except the Toronado and Hillman Hunter, with Whizzwheels and a less expensive finish as #387 . It would also, after a few rare transition issues, lose the rear jewels and, like the #281 Rover and #304 Camaro, the Whizzwheels version is very scarce and much more expensive due to very low sales and thus now being hard to find.



Most of the Golden Jacks series are easy to find and, as they were not suitable for high speed chases around the floor or racing, they tend to have remained in reasonably good condition. None have great suspension but also none seem to have failed suspension either, unlike so many Ghias and Mustangs, for instance.

The Corgi Model Club have, at the time of writing, issued copies of the Rover, Oldsmobile and Hillman Hunter.


Friday, 14 August 2026

Not quite Corgis

 


At first glance this looks like the #264 Oldsmobile Toronado. Then you see the wheels - and they're not the #276 Golden Jacks variety either - and the shade of blue is unlike any that Corgi issued, despite there being quite a range from turquoise blue to rich, dark blue during its production. And what is that? Opening doors? Goodness me, where on Earth does this come from?

Alicante. Spain. These are extremely good copies of the Corgi casting by a company called Auto-Pilen and date from the early 1970s. Indeed, these are so similar that one has to assume that the company took a Corgi model apart and made a mould from that. For me these are like the Corgi 'variations' I so enjoy finding and Auto-Pilen have managed to add more features to many of them as well. The Oldsmobile above is their model reference #307.


You will find several editions of the same car. Here there is a lovely chrome-plated model (#308) and below a Policia version (#298).


In each case the control for the headlamps operates very smoothly - indeed, rather better than the Corgi models themselves! The jewels look exactly the same as the Corgi models too, as do the chrome fittings.

Here are some more Auto-Pilen Corgis that I have in stock at the time of writing, All the images will take you to the appropriate page in my store if anyone wants more images or to purchase one.

The #310 Chevrolet (Corvette) Stingray
models #300 (green and silver editions) and #299-1 for the chrome-plated model




The #347 Chevrolet Astro 1.6
(#315 and #316 for a chrome-plated version)


The #384 Adams Probe 1.6
(#505 and #506 for a chrome-plated version)


The #334 Mini Cooper
(#319 and #320 for a chrome-plated edition) 
There is also a #291 Mini-Cooper Rally listed which I would expect to be based on the same casting.


Auto-Pilen also made a beautiful version of the Corgi #284 Citroen SM. You will also find Dinky copies too but I am not sure if there are any more Corgis. There are a Porsche 917 and Carrera 6 in one list I have found as well as a Citroen DS 23 and GP Beach Buggy which I need to investigate if ever I find one. The list also features the BRM and Lotus F1 racing cars which may be further possibilities.

These models are now quite hard to find here in the UK, although may be common across whatever the Spanish equivalent to a boot sale is. The company produced models through to the 1990s but, to the best of my knowledge, these would be the sole models of interest to Corgi collectors.

They are very well-made, solid and the opening parts operate smoothly. The wheels look great but suspension is seldom very good, either firm or practically non-existent. One nice thing is that the bases are screwed on - so if a model does need repair, or a fresh coat of paint, then that is relatively simple to achieve without having to 'break' rivets. Now, this does, of course, men that one can never be absolutely certain that what you have is totally original but I can live with that.

Prices are similar to their Corgi equivalents from what I can gather so, being comparatively unusual, they seem to represent good value to me. Most that I have found and that you will come across will not have either the box or the plinth to which they seem to have been attached when issued, with a hole evident in the base where a screw would have fitted.

Saturday, 11 July 2026

Corgi Chevrolet Impalas

 


You will, of course, be familiar with this recent issue of the wonderful #248 Chevrolet Impala, the second edition of the saloon model, this time in a butterscotch and cream flavour, as opposed to pale blue or salmon. What you will not be familiar with, however, is the finish on this delightful example, which really should be described as Impala à la Pearson, having being expertly polished so that what the Club sent us by way of a strange satin-finished model (and attempted to assert that this was how it was intended to be issued to boot!) now looks much more like it should.


My 'satin finish' Club edition placed next to Chris Pearson's shows the difference clearly.


Mr Pearson also likes to replace the rivets with something that better matches the originals.


Mr Pearson tells me that his Aunt Iris worked at the Corgi factory from 1958 to 1983 and he would sometimes accompany her as a child and he recalls seeing a number of 'prototypes', not that he would have known they would have been prototypes at the time. One was the #481 Chevrolet Police Patrol Car with a white lower section. The other was the #482 Chevrolet Fire Chief Car but with a black lower section.

As luck would have it, the two issued models can simply be taken apart and the sections swapped and there we have very nice copies of the 'prototypes'! It has since occurred to me that what he saw at the factory may just have been some 'mistakes' or someone having fun with the two halves with #481 and #482 probably rolling down the production line at similar times in 1965/66. I feel this is more likely, certainly for the Fire Chief model.

My research indicates that the Fire Chief car is unlikely to have existed in the 1959-style. In 1959, General Motors completely broke the mould with a wildly low, wide, and aggressive space-age design. The massive protruding rear "batwings" and sprawling trunk lines made it a styling masterpiece, but highly impractical for utilitarian city fleets. Because of the extreme rear fins, municipal fire and police departments overwhelmingly rejected the 1959 Impala sedan for official duty.

 Instead, the rare 1959 Chevrolets that did make it into fire service were almost exclusively 1959 Chevrolet Brookwood or Kingswood Station Wagons (which flattened out the wild fins to carry ladders and equipment), or stripped-down, lower-trim Biscayne sedans. Corgi took considerable artistic license by reusing their existing, highly popular 1959 Impala civilian saloon diecast mould (originally released in late 1959 as Corgi #223) to create the Fire Chief edition.

I have been able to find just one example of the 1959 style Impala in genuine use as a police car, this image, courtesy of the Ypsilanti, Michigan Community archives at https://www.reddit.com/r/ypsi


Nevertheless, the two variants that Mr Pearson very kindly sent me are very well constructed and fun to add to my own collection. I have always been a fan of the Impalas (although not the final throes of vehicles for kennel services or poodle display).

Here they are for your admiration.









Lastly, I am not at all sure now that there was ever such a thing as the 1959 Impala as a taxi in either all yellow or the later yellow and red, other than, perhaps, much more recently, in Cuba! It was the Police car that came first, in December 1959, and I can see that there will have been some evidence of a vehicle they could reproduce. After that, I do believe it was a matter of making the most from an excellent casting.

One might say that the Corgi Model Club are doing the same, and I am not referring necessarily to the Impalas here. Take a look at their forthcoming issues:

R345 MGC GT
R303S Mercedes-Benz 300SL Open Top Roadster (cream edition)
R246 Chrysler Imperial (Kingfisher blue edition)
R275 Rover 2000TC (white edition)
R302 MGA (teal edition)
R318 Lotus Elan S2 (copper edition)

There is also a store-only issue of an MGA in off-white in October by way of celebration of Corgi's 70th anniversary. I quite like the idea of a variation of one of the early models for this purpose but with the teal edition already in the pipeline at about the same time I feel they would have been better advised to choose one of the actual 1956 releases, not this one, which was May 1957, nearly a year later. There is, of course, a fair case to be made of economy of scale, using resources in several different ways but the frequency we see now does make me wonder whether all is well back at the Corgi ranch. I know that just about everybody who reads this has enjoyed collecting diecast models but I am not so sure there is such a certainty of a continuing robust market for people collecting new diecast models.

It will be quite nice to see fresh-looking examples of the Chrysler, Rover and MGA, the Chrysler and MGA being extremely hard to find in any condition. The Rover is not that common either. So I can see that the Club provide a way for people to fill missing spaces. I am also quite content with the production of models that were not actually issued, such as the Lotus Elan in copper and the MGA in off white. These are interesting and could be collectible as a group on their own although, having said that, it could be argued that every Club issue would fall into this category as none are ever quite right!